Kilku użytkowników napotkało kod błędu 0x800701B1 podczas próby kopiowania i wklejania lub przenoszenia niektórych plików w Eksploratorze Windows. Ten błąd jest również zgłaszany podczas próby zainstalowania systemu Windows 10 na dysku twardym USB (HDD).
Ten kod błędu może być spowodowany kilkoma przyczynami, ale główne z nich to niewystarczający port USB 2.0, niekompatybilny/niekompatybilny sterownik lub niewystarczająca moc wyjściowa zasilacza. W tym artykule wymieniliśmy kilka możliwych metod, które mogą pomóc w naprawieniu tego kodu błędu.
An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem.
Error 0x800701B1: A device which does not exist was specified
Co powoduje kod błędu 0x800701B1 w systemie Windows 10?
W związku z tym ten konkretny kod błędu może być spowodowany kilkoma różnymi problemami. Tutaj przygotowaliśmy listę możliwych winowajców błędu 0x800701B1:
- In some cases, a USB 3.0 port will be required depending on which HDD / SSD you are using. Then you will be ready to achieve the required dump speeds and power output.
- This error code can occur if the external drive you are using uses a generic driver. In this case, reinstalling the dedicated driver may solve the problem.
- You may not be able to control all connected peripherals if you have a standard power supply and a lot of peripherals connected. In this case, you can either upgrade the power supply or disable some peripheral devices that are not necessary.
Fix error code 0x800701B1 on Windows 10
The following are the methods to fix this error code 0x800701B1:
1. Use another USB port to connect HDD / SSD.
Plugging the affected drive into a USB 3.0 port instead of a classic USB 2.0 port may help fix error code 0x800701B1.
This method will fix the error when the problem occurs due to insufficient baud rate or insufficient power. Since USB 3.0 is more efficient for faster transfer speeds, please try this method once and let us know if it works.
If you do not find this method useful, try the next one.
2. Reinstall the drivers.
Driver inconsistency / incompatibility is another possible factor that can cause error code 0x800701B1. In this case, you need to install a new version that is compatible with your hard drive. Detailed instructions for this are given below:
- Press Windows Key + R to open the Run dialog box.
- Enter devmgmt.msc in the Run dialog box and click OK .
- In the Device Manager window, locate the disk drivers and expand the drop-down menu.
- Now right click on the culprit driver that is causing this error code and click on Uninstall device .
- Wait for the process to complete and restart your computer.
This will uninstall the current driver and switch your Windows to a generic driver.
Note. In case the problem is resolved, keep the generic driver or install the custom driver from the manufacturer’s website.
3. Upgrade your power supply.
Insufficient power from the power supply unit (PSU) can also cause this error. So, if you are still facing this problem, remove any nonessential peripherals connected to your computer and see if that solves the problem.
Resolution of the error confirms that the problem is with the power supply. After that, you should choose a power supply with a capacity greater than 500W.
I hope the above methods help you fix error code 0x800701B1.
Dodaj komentarz